Your current location: Home > Products > GEPON Series > Optical Line Termination

Name:Eight Ports EPON OLT       Model: OLT-1000

Optical line termination, 8 EPON interfaces (4 combo SFP+4 RJ45), SM, single fiber, SC/PC connector,1x64 PLC, console ports for management, internal power, AC200~240V, 322.1mm (Length) * 482.60mm (Width) * 44.7mm (Height), 19'', 1U.
Features:  
◇ Provide 8 PON Ports.
◇ Provide 4 GEWAN Interfaces (with 1.25G SFP OpticalTransceiver or 1000Base-T SFP Copper Transceiver).
◇ Support 512 ONUs connection (1:64 splitting ratio).
◇ Support L3 Ethernet switch, 200Gbps switch capability.
◇ Provide RS232 serial configuration interface, Ethernetin-band and out-band configuration methods.
◇ Support CLI configuration and SNMP network management.
◇ Typical power consumption 60W.
◇ Support Dynamic Bandwidth Allocation (DBA), granularity 64Kbps.
◇ Support ONU MAC auto binding and filtering, supportoff-line service configuration and automotive configuration deployment.
◇ Support PON ports Isolation, support AEC encryption.
◇ Support 4096 VLANs adding, transparent and translation,support VLAN stacking (QinQ).
◇ Support line-rate learning and aging of 32K MAC address, support MAC address limitation.
◇ Support IGMP v1/v2 Snooping and Proxy.
◇ Support priority queue scheduling with SP, WRR and SP+WRR algorithms.
◇ Support port rate limitation, support packet filtering.
◇ Support port mirroring and port aggregation.
◇ Provide searching and statistics of log, alarm andperformance.
◇ Support SNMP v1/v2c network management.
Description 
EightPorts EPON OLT, complying with IEEE802.3ah, YD/T 1475-2006 and CTC 2.1 standards,is a 1U pizza-box OLT equipment with flexible configuration, easy deployment,small space requirement, high performance, cost effective etc advantages. It’sspecially designed for fiber access network such as Fiber-To-The-Home (FTTH), Fiber-To-The-Office (FTTO), IP surveillance etc applications. 
Parameter

Hardware Specification

Data  Interfaces

Provide  8 PON ports

Provide 4 GE WAN Interfaces  (with 1.25G SFP Optical Transceiver or 1000Base-T SFP Copper Transceiver)

Management  Interfaces

Provide  one 10/100Base-T RJ45 out-band management  interface

Out-band  management interface via any GE WAN interface

Provide  RS232 serial configuration port

Data  Switch

Support L3 Ethernet switch,  200Gbps switch capability with no any blocking

LED indications

RUN, ALM, PW1, PW2 indicates  the status of system running, alarm and power supplies

PON1 to PON8 indicates LINK and  Active status of each PON port

GE1 to GE4 indicates LINK and Active  status of each GE WAN interface

Power  Supply

220V /1A  AC power supply (may change to DC power  supply or dual power supplies according to customer requirements)

Typical  power consumption 60W

Weight

4.6 Kg

Case  Temperature

0-55

Size

322.1mm (Length) * 482.60mm  (Width) * 44.7mm (Height)

Software Specification

EPON Standard

Complying with IEEE802.3ah,  YD/T 1475-2006 and CTC 2.1 standards

DBA

Support  fixed bandwidth, guaranteed bandwidth, best-effort bandwidth and priority  configurations

Bandwidth granularity  64Kbps

Security

Support  AES and triple churing encryption for PON network

Support  ONU MAC address binding and filtering

VLAN

Support  4096 VLANs adding, transparent, translation and deletion

Support  VLAN based on port, MAC, Ethernet protocol and IP sub-net

Support  VLAN stacking (QinQ)

MAC Learning

Support  32K MAC address

Line  rate MAC address learning by hardware

Support  MAC limitation based on port, VLAN and link aggregation

Spanning  Tree protocol

Support  IEEE 802.1d (STP), 802.1w (RSTP) spanning tree protocols

Multicast

Support  IGMP Snooping and IGMP Proxy

Support  IGMP v1/v2

QoS

Support 802.1p  priority queue scheduling

Support SP、WRR and SP+WRR scheduling algorithms

ACL

Rule  according to destination IP, source IP,  destination MAC, source MAC, destination protocol port number, source  protocol port number, SVLAN, DSCP, TOS, Ethernet type, IP priority, IP packet  protocol type etc

Packet  filtering according to above rules

Cos  setting, IP priority setting, mirroring, rate limitation and port  re-direction according to above rules

Flow  Control

Support  IEEE 802.3x duplex flow control

Support  port rate limitation

Link  Aggregation

Support  8 link aggregation group, 4 member ports per group

Mirroring

Support  port mirroring for WAN interfaces and PON ports

Log

Support  log output mask according to alarm level

Support  log output to terminal, file and log server

Alarm

Support  4 levels alarms (Critical, Important, minor and warning)

Support  6 alarm types (communication, QoS, process failure, hardware and  environment)

Support  alarm output to terminal, log and SNMP network management server

Performance  statistics

Performance  sampling period from 1 to 30s

Support  15 minutes performance statistics for WAN interfaces, PON ports and ONU UNI  ports

Maintenance

Support  OLT configuration saving, and restore to factory configuration

Support  OLT on-line upgrading

Support ONU MAC  auto binding and filtering, support off-line service configuration and  automotive configuration deployment

Support  ONU remote upgrading and batch upgrading

Management

Support  local or remote CLI configuration

Support  SNMP v1/v2c network management, support in-band and out-band  network management

Ordering Information

P/N

Description

EPON-OLT-8PON

8 PON ports OLT220V AC power supply

SFP-GEPON-PX20-D

GEPON OLT SFP transceiver, 20Km  distance

SFP-GE-RJ45

GE SFP Copper Transceiver, RJ45

SFP-GE-SX-MM850

GE SFP 1.25G optical transceiver, 850nm, 550m, LC

SFP-GE-LX-SM1310

GE SFP 1.25G optical transceiver, 1310nm, 10Km, LC

Applications
◇ Triple-play(GEPON-IP, CATV, VOIP)
◇ FTTx (FTTH, FTTP, FTTB, FTTC)

Download DOC:

    Links:

Technical support: Ningbo Youxin Optic-Electronic Technology Co.Ltd.

Phone:86-574-89118312 86-574-89118317 86-1860-6600677 Fax:86-574-89118315
Copy right © 2004 youfibercable.com