Optical line termination, 8 EPON interfaces (4 combo SFP+4 RJ45), SM, single fiber, SC/PC connector,1x64 PLC, console ports for management, internal power, AC200~240V, 322.1mm (Length) * 482.60mm (Width) * 44.7mm (Height), 19'', 1U.
Features:
◇ Provide 8 PON Ports.
◇ Provide 4 GEWAN Interfaces (with 1.25G SFP OpticalTransceiver or 1000Base-T SFP Copper Transceiver).
◇ Support 512 ONUs connection (1:64 splitting ratio).
◇ Support L3 Ethernet switch, 200Gbps switch capability.
◇ Provide RS232 serial configuration interface, Ethernetin-band and out-band configuration methods.
◇ Support CLI configuration and SNMP network management.
◇ Typical power consumption 60W.
◇ Support Dynamic Bandwidth Allocation (DBA), granularity 64Kbps.
◇ Support ONU MAC auto binding and filtering, supportoff-line service configuration and automotive configuration deployment.
◇ Support PON ports Isolation, support AEC encryption.
◇ Support 4096 VLANs adding, transparent and translation,support VLAN stacking (QinQ).
◇ Support line-rate learning and aging of 32K MAC address, support MAC address limitation.
◇ Support IGMP v1/v2 Snooping and Proxy.
◇ Support priority queue scheduling with SP, WRR and SP+WRR algorithms.
◇ Support port rate limitation, support packet filtering.
◇ Support port mirroring and port aggregation.
◇ Provide searching and statistics of log, alarm andperformance.
◇ Support SNMP v1/v2c network management.
Description
EightPorts EPON OLT, complying with IEEE802.3ah, YD/T 1475-2006 and CTC 2.1 standards,is a 1U pizza-box OLT equipment with flexible configuration, easy deployment,small space requirement, high performance, cost effective etc advantages. It’sspecially designed for fiber access network such as Fiber-To-The-Home (FTTH), Fiber-To-The-Office (FTTO), IP surveillance etc applications.
Parameter
Hardware Specification | |
Data Interfaces | Provide 8 PON ports |
Provide 4 GE WAN Interfaces (with 1.25G SFP Optical Transceiver or 1000Base-T SFP Copper Transceiver) | |
Management Interfaces | Provide one 10/100Base-T RJ45 out-band management interface |
Out-band management interface via any GE WAN interface | |
Provide RS232 serial configuration port | |
Data Switch | Support L3 Ethernet switch, 200Gbps switch capability with no any blocking |
LED indications | RUN, ALM, PW1, PW2 indicates the status of system running, alarm and power supplies |
PON1 to PON8 indicates LINK and Active status of each PON port | |
GE1 to GE4 indicates LINK and Active status of each GE WAN interface | |
Power Supply | 220V /1A AC power supply (may change to DC power supply or dual power supplies according to customer requirements) |
Typical power consumption 60W | |
Weight | 4.6 Kg |
Case Temperature | 0-55℃ |
Size | 322.1mm (Length) * 482.60mm (Width) * 44.7mm (Height) |
Software Specification | |
EPON Standard | Complying with IEEE802.3ah, YD/T 1475-2006 and CTC 2.1 standards |
DBA | Support fixed bandwidth, guaranteed bandwidth, best-effort bandwidth and priority configurations |
Bandwidth granularity 64Kbps | |
Security | Support AES and triple churing encryption for PON network |
Support ONU MAC address binding and filtering | |
VLAN | Support 4096 VLANs adding, transparent, translation and deletion |
Support VLAN based on port, MAC, Ethernet protocol and IP sub-net | |
Support VLAN stacking (QinQ) | |
MAC Learning | Support 32K MAC address |
Line rate MAC address learning by hardware | |
Support MAC limitation based on port, VLAN and link aggregation | |
Spanning Tree protocol | Support IEEE 802.1d (STP), 802.1w (RSTP) spanning tree protocols |
Multicast | Support IGMP Snooping and IGMP Proxy |
Support IGMP v1/v2 | |
QoS | Support 802.1p priority queue scheduling |
Support SP、WRR and SP+WRR scheduling algorithms | |
ACL | Rule according to destination IP, source IP, destination MAC, source MAC, destination protocol port number, source protocol port number, SVLAN, DSCP, TOS, Ethernet type, IP priority, IP packet protocol type etc |
Packet filtering according to above rules | |
Cos setting, IP priority setting, mirroring, rate limitation and port re-direction according to above rules | |
Flow Control | Support IEEE 802.3x duplex flow control |
Support port rate limitation | |
Link Aggregation | Support 8 link aggregation group, 4 member ports per group |
Mirroring | Support port mirroring for WAN interfaces and PON ports |
Log | Support log output mask according to alarm level |
Support log output to terminal, file and log server | |
Alarm | Support 4 levels alarms (Critical, Important, minor and warning) |
Support 6 alarm types (communication, QoS, process failure, hardware and environment) | |
Support alarm output to terminal, log and SNMP network management server | |
Performance statistics | Performance sampling period from 1 to 30s |
Support 15 minutes performance statistics for WAN interfaces, PON ports and ONU UNI ports | |
Maintenance | Support OLT configuration saving, and restore to factory configuration |
Support OLT on-line upgrading | |
Support ONU MAC auto binding and filtering, support off-line service configuration and automotive configuration deployment | |
Support ONU remote upgrading and batch upgrading | |
Management | Support local or remote CLI configuration |
Support SNMP v1/v2c network management, support in-band and out-band network management |
Ordering Information
P/N | Description |
EPON-OLT-8PON | 8 PON ports OLT, 220V AC power supply |
SFP-GEPON-PX20-D | GEPON OLT SFP transceiver, 20Km distance |
SFP-GE-RJ45 | GE SFP Copper Transceiver, RJ45 |
SFP-GE-SX-MM850 | GE SFP 1.25G optical transceiver, 850nm, 550m, LC |
SFP-GE-LX-SM1310 | GE SFP 1.25G optical transceiver, 1310nm, 10Km, LC |
Applications
◇ Triple-play(GEPON-IP, CATV, VOIP)
◇ FTTx (FTTH, FTTP, FTTB, FTTC)